Cameras: News and Updates
WEISSCAM HS-2 Digital Highspeed Camera Camera Overview The WEISSCAM HS-2 is the newest, uncompressed digital highspeed camera for framerates up to 4.000fps. It is develepod as a standalone camera aiming especially the needs of cinematographers. Coming with an easy workflow, two Streams (RAW + HD) via HD SDI, two formats (4:3 + 16:9) and cinema-style images, it is designed to offer you the freedom of shooting either in HD or RAW mode. The WEISSCAM HS-2 has a full Format Super35 CMOS Sensor with a global shutter. By using the Interchangeable Mount System (IMS) from P+S Technik you can attach nearly every lenses on the camera (PL Mount, Nikon F-Mount, Panavision Mount, etc.) and also change the Mount within a few seconds. The output of the WEISSCAM HS-2 offers two Streams at the same time and uses the HD SDI interface for both signals. With the Weisscam „RAW IN HD SDI“ mapping, you are able to transport the RAW files via the worldwide standard and fast HD SDI single and dual link interface. An intelligent master/ slave DC/DC power management, saves the camera from any short circuit and makes it needless to turn off the camera for a battery change. A lot of mounting possibilities allows you to connect additional accessories like onboard monitor, lens control system, etc. and power them by the several outputs of the DC/DC board. The very fast boot up time allows you to be ready for shooting in less than 7 seconds.
Resources:
|
||||||||