Cameras: News and Updates
The most recent firmware version for the v1610 camera is version 9818 or 20
This upgrade is an optional upgrade for v1610 cameras.
Please determine if your camera’s firmware can be upgraded in the field by checking the current firmware that is installed in your camera. You can check the version of firmware in your v1610 camera by running the PCC application currently installed on your PC and clicking on the LIVE tab, selecting CAMERA INFO and looking for the Firmware/FPGA/Kernel or phFW version. If you are running legacy software, select HELP followed by ABOUT. For the v1610 camera, the minimum Firmware version is 5388, the minimum FPGA version is 543489, and the minimum Kernel version is 421.
If your camera does not meet the minimum requirements, the camera cannot be upgraded in the field, please contact Vision Research Technical Support by phone at 973-692-4003 or by email at firstname.lastname@example.org to arrange for a firmware upgrade.
If your camera meets the minimum requirements, then upgrade your Phantom v1610 camera using the procedure below
1. You will need to download and install PCC 2.2.737.0 in order to perform this upgrade. Attempting to use an older version of PCC software may cause the firmware upgrade to fail, requiring the camera to be returned to Vision Research for service. Please click on the following link to download PCC 2.2.737.0:
2. Download the firmware and save the file in a convenient location on your PC.
Please note: While this firmware and the upgrade procedure has been thoroughly tested, upgrading firmware in a camera might render the camera inoperable, requiring return to Vision Research. Do not undergo this procedure if you require use of your camera in the next few weeks. For alternate upgrade options, please contact email@example.com.