Announcement

Collapse
No announcement yet.

About various takes

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • About various takes

    what is difference between take1, take2 etc.. is it correct there is only one perfect take and rest are imperfect. And does director or editor save the imperfect takes for future purpose.

  • #2
    A take is each time the shot is rolled on a piece of action. So, let's say the actor says "Hi, how are you?" - for each time the actor performs "Hi, how are you?" with the camera in the same position it is considered a "take". So take 1, take 2, take 3, etc. is the number of times that scene is performed.

    When you move the camera or change the lens then it would be considered a new shot and the take count would start over at take 1.

    An example of what a "scene 1" might look like.

    Scene - Take:
    1-1
    1-2
    1-3
    new setup for the scene
    1A-1
    1A-2
    1A-3
    new setup for the scene
    1B-1
    1B-2
    1B-3

    Hope that helps.

    As far as imperfect takes vs perfect takes. I don't focus on finding the perfect take. I will often piece parts of multiple takes together into a scene. The first half might be better than the second half in one take and the opposite in another. This is a very good reason to let your actors work through an entire scene without interrupting them.

    I watch through all the takes before I start editing a scene, so never think a take is unusable because there might be something in it that will save the edit.
    Jared Isham
    Filmmaker (Writer/Producer/Director/DP/Editor)
    http://www.youtube.com/jisham
    http://www.jaredisham.com

    Comment


    • #3
      Assume for scene-take (1-1) u choose 2-shot for the dialog "hi, How r u".
      Then for scene-take (1A-1) means u choose new setup as OTS for the same dialog "hi, how r u". is that right.

      Comment


      • #4
        Yeahp, exactly.
        Scene 1= 2 shot
        Scene 1A = OTS
        Scene 1B = ECU (Extremem Close Up)

        when you run out of letters you double them up
        1AA
        1BA
        1CA
        or a variation of that...but hopefully you don't have that many shots for your scene.. that would be super, super complicated.
        Jared Isham
        Filmmaker (Writer/Producer/Director/DP/Editor)
        http://www.youtube.com/jisham
        http://www.jaredisham.com

        Comment


        • #5
          clapperboard mentions 3 things, (scene, shot, take) then what is the shot number in above example.
          Eg: A conversation scene
          {
          X : hi, How r u?
          y: i m fine
          X : "where r u going"
          }

          and take increases until the imperfection happens in scene.

          Scene, shot, take (1 : A :1) => "hi how r u", "i m fine", "where r u going"
          Scene, shot, take (1 : A :2) => "hi how r u", "i m fine", "where r u going"
          Scene, shot, take (1 : A :3) => "hi how r u", "i m fine", "where r u going"

          Scene, shot, take (1 : B :1) => "hi how r u", "i m fine", "where r u going"
          Scene, shot, take (1 : B :2) => "hi how r u", "i m fine", "where r u going"
          Scene, shot, take (1 : B :3) => "hi how r u", "i m fine", "where r u going"

          Scene, shot, take (1 : C :1) => "hi how r u", "i m fine", "where r u going"
          Scene, shot, take (1 : C :2) => "hi how r u", "i m fine", "where r u going"
          Scene, shot, take (1 : C :3) => "hi how r u", "i m fine", "where r u going"

          Where A= 2-shot, B=OTS, C=Close up are 3-setup's

          is the above is correct?
          Last edited by satyaos; 01-20-2017, 03:06 AM.

          Comment


          • #6
            I never understood the 3 items - that is more of a European approach. In the US we usually it listed as "Roll, Scene, Take" Roll is what camera roll you are on. Each time you reload the camera you change the Roll #. Scene is the shot you are doing (1A, 1B, 1C, etc.) and take is how many times you shoot that shot.

            I'm gonna guess that you have it correct in the way you set it up. That appears to be correct.

            I think I'll try to put together a simple video in the next few weeks explaining what I know about how it works...but it does appear to be correct in your interpretation.
            Jared Isham
            Filmmaker (Writer/Producer/Director/DP/Editor)
            http://www.youtube.com/jisham
            http://www.jaredisham.com

            Comment

            Working...
            X